question

glennyg avatar image
glennyg asked

Equalisation Voltage won't disable in VictronConnect

Hi, so I can't disable the equalisation voltage. I've been told to set it to 0 to disable, but it will only go to 9. Even when I type 0 and press save, it immediately changes to 9. Any thoughts?


Thanks!!!


Glenn

software
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Select the LiFePO4 preset and the equalisation will turn off. After that you can edit the other settings.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

glennyg avatar image glennyg commented ·

Unfortunately I'm not in front of the controller- is this just under presets in the Victron settings? I don't recall seeing such a preset, only user defined. Where can I find it? I'm sure the firmware and software is up to date.... TIA!

0 Likes 0 ·
Show more comments
glennyg avatar image
glennyg answered ·

ich liebe dich! Vielen Dank, Mattias! You've been a great help!!!

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

snowman avatar image
snowman answered ·

What worked for me too. Thanks.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic