question

layesp avatar image
layesp asked

Limit the EasySolar discharge current?

Hello,
Is it possible to limit the discharge current of the battery on my Easy_Solar?

The setting in the ESS menu Limit inverter output does not work because it limits the total output of the battery + PV yield.
My battery is no longer 100% OK and if the current is too high it breaks down (4X12V-150AH)

There are no problems with lower discharge currents.
greetings
LayesP
Hallo,
Besteht die Möglichkeit, bei meinem Easy_Solar den Entladestrom der Batterie zu begrenzen.

Die Einstellung im ESS-Menü Wechselrichter-Leistung begrenzen, funktioniert nicht, denn sie begrenzt die Gesamtleistung Batterie+PV Ertrag.
Meine Batterie ist nicht mehr 100% in Ordnung und bei einem zu hohen Strom bricht sie zusammen ( 4X12V-150AH)

Bei kleineren Entladeströmen gibt es keine Probleme.
Grüße
LayesP
current limit
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @Layesp,

There currently isn't a way to distinguish between DC from PV or battery when setting Limit Inverter Power in ESS. Though it is a feature that has been previously requested.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

layesp avatar image layesp commented · 
Hello Guy Stewart,
do you think that this function will be controversial in the near future?

Best regards
Richard Schmidt
0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic