question

Ingo avatar image
Ingo asked

Assistant Explanation

What exactly does the following Assistant options mean?

I have an unstable grid where my Quattro loses frequency sync. I am looking for an Assistant option to select that triggers on Grid Sync Loss (Grid doesn't fail, frequency drops low).

relay assistant
1601819581364.png (3.4 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @Ingo

Bulk protection: an option that stops charging when bulk phase takes longer than 10 hours

General system failure: when there is an alarm.


what you can use is:


4 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Ingo avatar image Ingo commented ·

Thanks @Daniël Boekel (Victron Energy Staff)

I am looking for an option I can select when grid frequency drops below 47.5Hz. My Relay assistant doesn't work when the grid frequency drops low and that causes ACOut2 NOT to disengage and kills my batteries. I will test the 'Not Charging' option.

0 Likes 0 ·

Hi @Ingo, I don't know of such an assistant, so that's why I suggested to use the option listed above. that will effectively do the same: activate when AC-input is disconnected.

0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic