This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
The Multiplus just arrived. I'm adding it to a system with a Cerbo and a couple MPPT Smart charge cotrollers puls a BMV 712, all, hopefully, networked together. Do I need the MK3 to program the Multiplus or can it be done thru the Cerbo once connected via Cat5? Or am I missing other components here?
You will need the MK3 to do a firmware update if the current firmware on the multi is not recent enough. Apart front that, all programming could be done via the VRM portal from the device list
