Hi all,
Quite new to this, hoping somone can help me with my set up
I have a 12v 50ah lithium ion battery
80w solar panel
75/15 bluetooth mppt victron charge controller
I am unsure on what the best setting is.
Thanks all!
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi all,
Quite new to this, hoping somone can help me with my set up
I have a 12v 50ah lithium ion battery
80w solar panel
75/15 bluetooth mppt victron charge controller
I am unsure on what the best setting is.
Thanks all!
Hi, using the phone/tablet victron app called victronconnect,
Using the bluetooth dongle you change the setting in the settings menu under battery then Battery preset
select preset scroll down factory default then select Select preset
select setting and in there select the lithium battery type option.
For others reading this: The only Lithium battery preset on the MPPT charge controller is Lithium Iron Phosphate (LiFePo4) and this is definitely not a good setting for Lithium Ion.
It will vary a little depending on the specific cells but if you charge to 4V per cell and cut off the load at 3V per cell * however many cells you have in series you should be good.
Additional resources still need to be added for this topic
Additional resources still need to be added for this topic
Did You Know - How to create a battery profile for non-Victron batteries?
4 People are following this question.