question

peter-a avatar image
peter-a asked

New VRM, Delete AC Input Icon

I´ve got an off-grid site with no normal AC input, just a generator.

Is it possible to remove the icon for AC Input and just keep the generator icon?


remote console
vrm.jpg (23.9 KiB)
9 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Ingo avatar image Ingo commented ·

@Peter_A Can I ask when the Generator icon appeared? Did it come up the first time you started the Generator or was it there since the beginning?

The reason I ask is that I have a generator on ACIn1 but it hasn't been running since the new VRM portal update and it doesn't show on mine (yet).

0 Likes 0 ·
peter-a avatar image peter-a Ingo commented ·

Sorry, I dont know!

Generator was running this weekend so I can´t say :(


0 Likes 0 ·
Ingo avatar image Ingo peter-a commented ·

Perfect, thanks for the feedback. I'll start the generator to see if it will pop up after some data collection.

0 Likes 0 ·
Matthias Lange - DE avatar image Matthias Lange - DE ♦ Ingo commented ·

@Ingo I think @Peter_A have a Quattro, not a Multi.
A Quattro has two AC inputs, one for grid and one for a generator.

0 Likes 0 ·
peter-a avatar image peter-a Matthias Lange - DE ♦ commented ·

I have an Easy Solar 12/1600/70, I´m quite sure it only has one AC input.


0 Likes 0 ·
peter-a avatar image peter-a Matthias Lange - DE ♦ commented ·

I have the same problem with both my systems.

One uses an Easy Solar 12/1600/70, the other one uses MultiPlus 12/1200/50.

Picture in VRM looks the same for both sites

0 Likes 0 ·
Ingo avatar image Ingo Matthias Lange - DE ♦ commented ·

@Matthias Lange - DE I didn't want to hijack Peter's thread but thought it strange that he has one Input only but two shows on VRM. I on the other hand have a Quattro with Grid and Generator but the generator hasn't run since the portal change and doesn't show (yet). I suspect it needs input before it's recoginised.

0 Likes 0 ·
jon-lowbank avatar image jon-lowbank commented ·

I have the same problem. I have a Multi with no grid input. But one shows on VRM

0 Likes 0 ·
screenshot-20201019-124508.png (166.1 KiB)
jon-lowbank avatar image jon-lowbank commented ·

I have the same problem. I have a Multi with no grid input. But one shows on VRM


0 Likes 0 ·
screenshot-20201019-130200.png (189.3 KiB)
2 Answers
wkirby avatar image
wkirby answered ·

You can change the AC Input from Grid to Generator.

Go here:

Then it looks like that:

In VRM it looks like that:

My VRM says N/A and AC Loads is showing because I have a grid meter set as grid and I don't want to mess about too much with my production system. Maybe I can repeat this with my development system. I think it still demontrates that you can have one AC source box labelled as Generator.


1601279324313.png (54.3 KiB)
1601279425418.png (26.3 KiB)
1601279482309.png (32.7 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

peter-a avatar image
peter-a answered ·

Hi, it looks that I have the same settings as you show, but still the same problem.

what am I missing?


aa1.png (85.6 KiB)
aa2.png (72.9 KiB)
aa3.png (81.9 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

wkirby avatar image wkirby ♦♦ commented ·

I repeated this with my Development system.
I had exactly the same as you show above - both AC Input and Generator boxes (both showing N/A).
When I applied AC to the MultiPlus, then the AC Input box disappeared from VRM and now I just have Generator:

Unfortunately, when AC is switched off, the AC Input box returns:


0 Likes 0 ·
1601286221452.png (35.5 KiB)
1601286983278.png (30.7 KiB)

Related Resources

Additional resources still need to be added for this topic