question

billknny avatar image
billknny asked

Can I see AC2 output in a GX system?

I have a Multiplus 24/3000/70 and a Cerbo GX monitor.

Is there any way I can see the AC2 output current on the GX system? This is the output that only comes on when shore power is connected. I am not sure where it shows up (if at all!) on the monitor.

MultiPlus Quattro Inverter Chargercerbo gx
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @billknny,

Sorry, but no.

The current for ACoutput2 is not measured separately, and not visible separately to ACoutput 1.

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

billknny avatar image billknny commented ·

Thanks Guy, Just to be clear, the AC2 output is INCLUDED in the AC output reported by the GX device?

0 Likes 0 ·
Guy Stewart (Victron Community Manager) avatar image Guy Stewart (Victron Community Manager) ♦♦ billknny commented ·

Yes, that is correct. The AC 1 output, and AC 2 output are combined, measured and displayed as a single AC output load on the GX device.

0 Likes 0 ·