question

michelg avatar image
michelg asked

New VRM bug - solar value stuck when there is no sun ?

Hi everybody ! Thanks ro the developpers for the new VRM presentation, it is very interesting. I may have found some bugs related to the power. At around 06h00 there is NO SUN, so no solar power available. Here we can see that the Total Solar and PV Inverter (ET112) have the same values.


And the OFF status of the MPPT & Power produced :

Thanks, Michel

cerbo gxVRM
vrm-power-issue-2.png (108.1 KiB)
vrm-power-issue-1.png (7.7 KiB)
vrm-power-issue-3.png (113.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

5 Answers
Teun Lassche avatar image
Teun Lassche answered ·

All cases mentioned above should be fixed, that is:


- Stuck values
- Installations mentioning realtime while they are not realtime

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

dennis avatar image dennis commented ·

@Teun Lassche (Victron Energy Staff)

Stuck values are fixed. But realtime is not working.

Never got back the realtime under Last updated

0 Likes 0 ·
1602053737586.png (3.2 KiB)
Teun Lassche avatar image Teun Lassche ♦ dennis commented ·

@dennis That is because you have two way communication disabled, see: https://www.victronenergy.com/live/vrm_portal:dashboard

0 Likes 0 ·
dennis avatar image dennis Teun Lassche ♦ commented ·

i am very sorry! Thats correct. Now it is working.

Thanks a lot!

0 Likes 0 ·
dennis avatar image
dennis answered ·

same Same here!

It seems the Values stuck at a point of time.

If i press F5 several times, it will change to the correct actual values (e.g. 15% SOC is correct). But after a few seconds or new F5 it will show the stuck values.



23-09-2020-07-38-00.gif (4.7 MiB)
1600839254880.png (52.3 KiB)
8 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Teun Lassche avatar image Teun Lassche ♦ commented ·

@dennis Your case is fixed

0 Likes 0 ·
Show more comments
ccb avatar image
ccb answered ·

Same issues for me, same values stays for days ...

Communication is ok, VenusGX no issues but VRM is ignoring the new data


capture-01.jpg (108.9 KiB)
capture-05.jpg (105.7 KiB)
capture-06.jpg (67.3 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ccb avatar image ccb commented ·

Same issue on Android app.

Nobody???

Does anyone know how we can draw attention to this issue?

0 Likes 0 ·
solarhack avatar image
solarhack answered ·

I really like where this is going, nice work.

Another bug or not? I also see the ability to remotely configure your system via VEconfig has also disappeared from the devices tab

6 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

harold avatar image harold commented ·

Remote VEConfig file upload download is still there!


0 Likes 0 ·
solarhack avatar image solarhack harold commented ·

@Harold, @osaether Not in mine, what menu option?

0 Likes 0 ·
Ole Saether avatar image Ole Saether solarhack commented ·

Same place as before. Under Device list. See screenshot.

0 Likes 0 ·
vrm.png (64.3 KiB)
solarhack avatar image solarhack Ole Saether commented ·

That's the same place have a look at my page

They are not showing

0 Likes 0 ·
1600856462297.png (31.9 KiB)
Ole Saether avatar image Ole Saether commented ·

Remote VEConfigure is not gone on my VRM.

0 Likes 0 ·
solarhack avatar image solarhack Ole Saether commented ·

I solved it, I was using MQTT and disabled two way communications in the remote console. I just checked the documentation and this must be enabled. So its not a bug, my mistake.

0 Likes 0 ·
n-dee avatar image
n-dee answered ·

Orientation of the bar @Grid is different. Why?



br,

Andy


1600867880540.png (18.8 KiB)
1600867920375.png (23.1 KiB)
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ccb avatar image ccb commented ·

I think this is because on the Grid we can have negative values.

In case of the other values they can only be positive.
If they set the trend horizontally the cell would probably become too crowded.

0 Likes 0 ·
Teun Lassche avatar image Teun Lassche ♦ ccb commented ·

It's indeed because you feed power back to the grid (it won't fit if we put that graph horizontally)

0 Likes 0 ·

Related Resources

Cerbo GX product page

GX family product range

Cerbo GX & GX Touch datasheet

Cerbo GX Manual

Venus root access document

Additional resources still need to be added for this topic