Hi,
I am using Lead-Batteries on my 3phase-Victron Setup with 7kWp.
1. The minimum SOC is 50% (I want the battery to discharge during night down to 50%)
2. I want to limit the charge power for the battery to 1000 W (to dont stress it too much)
3. The Gridpoint is set to 200 W (during night the battery should deliver power to the critical loads so that I do not get more than 200 W from the grid)
I was expecting that all the produced Energy will be stored in my battery (and be used during night), but everything is sent to the Grid. (see Pic 1)
Please check my setup and tell me if I have set anything wrong.
BR
Gawan