question

sky-chicken avatar image
sky-chicken asked

MPPT control and Cerbo GX to same solar charger?

I have a solar charger MPPT 100/30 connected to the Gerbo GX and also a MPPT control connected to the Gerbo GX. Is this an supported setup or does the system only allow one controller?

MPPT Controllerscerbo gxMPPT Control display
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
wkirby avatar image
wkirby answered ·

You can only connect one controller to the MPPT, either the Cerbo GX or the MPPT control.
The MPPT Control will not work if it is connected to the Cerbo GX.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

sky-chicken avatar image
sky-chicken answered ·

That was not the answer I hoped but thank you for the clarification!


1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Matthias Lange - DE avatar image Matthias Lange - DE ♦ commented ·

Everything you can see with the MPPT control you can also see at the Cerbo GX.
Only the settings can't be changed directly at the Cerbo.
But if the Cerbo is connected to the internet you can use the VictonConnect-Remote feature.
https://www.victronenergy.com/live/victronconnect:start#victonconnect-remote_vc-r_configuration_and_monitoring_via_vrm

0 Likes 0 ·