question

marekp avatar image
marekp asked

Remote Control tels me my MP-II is blocked :(

Can someone explain what this "blocked" mean?

remote console
screenshot-2020-09-13-remote-console-on-lan.png (17.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
klim8skeptic avatar image
klim8skeptic answered ·

Most likely you have a Mk3 plugged into the Multi. Unplug the Mk3....

7 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

marekp avatar image marekp commented ·

You right, I have it pluged into the multi, but how I am to use VictronConnect, to see local devices, without MK3?

Also, can this "bocked" be a reason for holes in the graphs on VRM?


0 Likes 0 ·
Matthias Lange - DE avatar image Matthias Lange - DE ♦ marekp commented ·

VictronConnect or VEconfig (<- in my opinion the better tool for programming) you only need for the programming after that you have to disconnect.
To monitor the Multi you can than use the GX device.

0 Likes 0 ·
Show more comments
marekp avatar image marekp commented ·

The holes are visible here

0 Likes 0 ·
screenshot-2020-09-13-028139d53674-vrm-portal.png (18.5 KiB)

Related Resources

Additional resources still need to be added for this topic