question

avnor avatar image
avnor asked

Multiplus 2 VDE0126-1-1 VFR2019

Hello,

When we select the country Grid "France VDE 0126-1-1 VFR2019"

The over frequency seems not to be OK. Indicated value is 50,6 Hz but should be 51,5 Hz.

Please confirm the adjustments


Multiplus-II
vfr2019.jpg (76.9 KiB)
vfr2019.jpg (76.9 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi Avnor, we’ll double check and come back to you Thank you

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi again, we checked and it the mistake is only there in the table shown in VEConfigure. The parameter used in the firmware of the product is OK.


The table in VEConfigure will be corrected on the next release - thank you for noticing!

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Vangelis Beligiannis avatar image Vangelis Beligiannis commented ·
Is there a VDE 0126 certificate available for the Multiplus II?
1 Like 1 ·