This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
My all 3 units came with temperature sensors.
In one of webinars someone said that temperature sensor is not needed for LFP batteries.
On the other hand the LFP batteries should not be charged below 5C.
Can this temperature sensor be used to prevent charging of the LFP batteries below 5C?
What batteries do you have?
Disconnecting/deactivating the charge should be done by the BMS.
Winston with 123smartBMS Gen3.
But if this charger can modify charging parameters for led-acid bateries, why not controling the charging of LFP batery based on temperature?
I'm not 100% sure, but the Multi can only measure the temperature where the sensor is connected and the BMS (should) monitors the temperature of every single cell.
