question

alistair-jeffcoat avatar image
alistair-jeffcoat asked

No output from Blue Smart IP67 12/25 charger yet the Bluetooth App shows the charger has an output of 12V DC

We have a Blue Smart IP67 12/25 charger that has been used both as a battery charger and as a power supply while at our workshop. When we have taken the charger to site and used the Bluetooth App to set it up as a Power Supply we get no output voltage at the load when using a multimeter to read the voltage. The information on the Bluetooth App shows that the charger has an output voltage of 12.8V. Even after doing a factory reset and then re-configuring the charger as a power supply there is still no output from the charger yet the App says it has an output voltage of 12.8V. If the unit has suffered from reverse polarity and the internal fuse has blown would the App pick this up?

charger
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

"If the unit has suffered from reverse polarity and the internal fuse has blown would the App pick this up?"

Unfortunately not but I think that is your problem, you have a blown internal fuse.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

lyle-cvinksi avatar image lyle-cvinksi commented ·

The internal fuse is auto-resettable - according to the documentation. But clearly thats not the case.

0 Likes 0 ·
lyle-cvinksi avatar image
lyle-cvinksi answered ·

I have exactly the same problem - They are meant to have a auto reset internal fuse in the event of reverse polarity....
The app connects, seems to think its output of voltage is fine, although it isnt pushing any current.
IMO the design is fatally flawed, the IP67 rating means its sealed, and anyone who owns one of these will attest to how HOT these chargers get. It is really only a matter of time before the whole show is over. More money down the drain.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

elewis33 avatar image elewis33 commented ·
This same situation has happened to me, with my 12/25 BSC. This is a very strange design to have an internal fuse and not have it be able to be reset. I've looked all through the app and not found where to do this.

I've also looked through the documentation but haven't seen where it says that internal fuse is supposed to reset automatically. I do see where it says there is a non-replaceable internal fuse in the 25 and 35 amp models. Can anyone point me to this documentation, for the IP67 12/25 where it references this fuse reset?


0 Likes 0 ·
Show more comments
gremlin01 avatar image
gremlin01 answered ·

In my case the external fuse in the output cable blew so I opened the cap, used a pliers to grab the fuse and then leveraged it out. Came out quite easily and easy to replace. Finding such a fuse is an interesting exercise in itself.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic