question

kai-behrends avatar image
kai-behrends asked

EMUS BMS integration to the Color Control GX

Hello,

I want to install a 48V LiFePO4 Battery system with an EMUS BMS, if I connect the EMUS BMS to the CCGX do I still need a BMV in order the monitor my battery on the CCGX?

Thanks in advance

BMS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
bricki avatar image
bricki answered ·

Hello Kai,

maybe the answer is too late for you, but you can connect the EMUS BMS via Can-Bus to the VE.Can or Can.BMS connector of a GX device. I‘ve dine this with a Cerbo GX.

Peter

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

arghhh40k avatar image arghhh40k commented ·

Trying to get this to work right now. What were your EMUS can settings to get it to talk to the Cerbo GX?


Have it set to 500kbps on EMUS and Cerbo on the BMS-Can port but so far not seeing anything.

0 Likes 0 ·
arghhh40k avatar image arghhh40k arghhh40k commented ·
Had the can pins swapped, works great now.
0 Likes 0 ·
Show more comments