question

bibbjs avatar image
bibbjs asked

Pinout for BMV700 RJ12 UTP

Hi,

I am looking for the pinout of the RJ12 UTP cable used between the shunt and the BMV700 display. My display has quit and I want to make sure the cable is good, and that it is getting the right bits from the shunt. I have been unable to find a replacement shunt board in the US and I don't want to have to just buy a new BMV.

BMV Battery Monitor
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

It's pin-to-pin. Eg Pin 1 to Pin 1, Pin 2 to Pin 2, etc.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bibbjs avatar image bibbjs commented ·

So a simple straight through cable. What are the pin functions? I assume there is a +12v and -12V pin and some data...


0 Likes 0 ·
Show more comments

Related Resources

Additional resources still need to be added for this topic