Is there anyway to use a digital input on a Cerbo to control the state of a MultiPlus, so that when the input is high the Multiplus is in Invert Mode and when low it is in charge only?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Is there anyway to use a digital input on a Cerbo to control the state of a MultiPlus, so that when the input is high the Multiplus is in Invert Mode and when low it is in charge only?
You should be able to do this at the Multiplus level not the Cerdo by using the Aux1 in the multiplus and setting up some assistants to act on the High/low signal
Paul, yes I can. The challenge I see is that the MultiPlus knows there has been a charge or load disconnect, but the Cerbo/Venus OS dose not. By having it in the Cerbo it would also provide alerts and logging which can also be picked up by VRM.
26 People are following this question.