I have noticed that ESS does not use the full capacity of the battery.
Does anyone know the reason for this?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have noticed that ESS does not use the full capacity of the battery.
Does anyone know the reason for this?
If you find the system will not full discharge the batteries while connected in ESS mode,
Try reducing the sustain voltage settings and Dynamic Cut-off settings in the ESS assistant on the Multi, configurable with VEConfigure.
This can all be done remotely, if the system is internet connect via Remote VEConfigure.
Let me know if you need me to expand any further on any of those details (or how to change them).
Also if you want maximum possible cycle depth (at the expense of blackout storage capacity) I would recommend changing the ESS mode to Optimised Self Consumption (without battery life) with a managed lithium battery. This can be done in the ESS menu on a GX device.
What is the minimum acceptable value for the dynamic cut off and sustain voltages if I use Pylontech US2000C batteries?
My systems are going to sustain before they reach the min SoC set to 10%.
29 People are following this question.