I have just bought a Phoenix Multi Control on eBay and have connected it to my MultiPlus 12v 3000 but it doesn't work. I have disconnected the DC power to the MultiPlus and tried again. I have also changed the cable but still not working.
I am trying to work out if the problem is with the MultiPlus or the remote. All other functions on the Multi are working fine. I have not had it connected to a remote before.
There is a soft 'clunk' sound from the MultiPlus when I switch it on via the remote, but it doesn't actually turn the inverter on properly. There is a similar sound when it is turned off. Is there a digital/analouge difference in technology with the Phoenix Multi control that's not compatible with the MultiPlus?
Grateful for any advice.
Thanks