Cerbo GX with BMV712. Several times in the last week the cerbo has activated the gen start relay before the battery SOC gets down to the set point. I have SOC start enabled to go at 40% and stop at 95%. There are no other conditions set for autostart. Occasionally the system will close the relay at somewhere around 85% and run to 95%. In the menu under gen start, the readout states "running from SOC" I do not have "quiet hours" set to on. The SOC on the BMV readout agrees with the Cerbo readout. I cannot understand why it comes on before getting to 40%. Any ideas? Cerbo set to auto update, firmware is 2.58.