This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Any one ever use the honda inverter generator EU3000IS hooked up to the Victorn inverter to charge the battery bank on cloudy days. I am being told they dont work good together. Please let me know if you have had successfully ran them together with no problems or what you did to fix it.
I have used a Honda EU3000i connected to a Multi 3k before.
You will want to read this first before attempting, and consider an AVR based model instead - https://www.victronenergy.com/live/multiplus_faq
Did you hook up the ground wire when you wired it to Multi? I use to run my off grid cabin with this generator and didnt want to have to spring for a new one that works with Victron. I had someone build me a kit with the 48/5000 quattro, he adjusted the charge, so my generator could handle the charge it will be slower, but should charge it. I was more worried about the ground wire because the Honda has a floating ground. Just wanted to see if anyone hooked it up and it ran with no issues.
No, I removed the ground wire as this generator is a V-O-V type and you short the one leg by connecting the ground wire. My EU30iS works perfectly, it's similar to your 3000iS.
I am using a Honda 3000o Handi with my Victron multiplis 3000120/12. It handles the load well but I notice that the ac overload on the generator trips instantly when first coming in line. I usually have to lower the current limiter to 8amps then increase once connected. Anyone else have this issue?
Do you have Dynamic Current Limiter checked? This will bring the genset on gradually, rather than in one hit.
