question

tony-towers avatar image
tony-towers asked

Switch as a group remote VEConfigure always enabled on both inputs

Hello, I have systems where¨switch as a group" is enabled on ac in 1 and disabled on ac in 2 as shown below.

However, both are enabled when remotely downloading the configuration. Even though I disable the AC IN2 again, the configuration always have both switches enabled.

How can I remotely send a configuration with only one switch as group enabled?

Thanks

VEConfigure 3switch
1597663104714.png (15.8 KiB)
1597663768726.png (10.9 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
tony-towers avatar image
tony-towers answered ·

Hello, I would appreciate if someone can give some help with this topic if possible, please

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tony-towers avatar image
tony-towers answered ·

latest firmware fix this issue

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic