Hello together,
I would like to change the maximum input current of the Quattro 8000/24 with the Color Control Display. I set the value to 32A and after some days or sometimes weeks, this value is changing back to 100A and the shore Power fuse is tripped.
This behavior is reproducible. I have the same system on 5 different boats, all of them have the same problem. This is a very big problem because after a few days in the harbor, the fuse will tripped and the boat have no longer shore power.
Connected to the CCGX is:
-Quattro 24/8000 [VE.Bus] VE Config: AC2 Input (Shore power) set to 32.0A with enabled "remote has priority" AC1 Input (Generator) set to 57A with disabled "remote has priority"
-Skylla-i 24/100 (1+1) Charger [VE.Can]
-BMV-712 Smart Shunt [VE.direct]
-VE.Bus to NMEA2000 Interface device [VE.Bus port from CGX]
I am extremely grateful for any advice!