question

Kasper avatar image
Kasper asked

victron quattro 24/8000 Relay program

Hallo. I have a victron quattro 24/8000 with a victron cerbo gx connecete to the system. is it possible to program one of the relays to pull ON when switching to generator (AC1) and stay on? i can not find an option in VE. Config 3. That would be a good thing in the Marine world.

MultiPlus Quattro Inverter ChargerGeneratorVEConfigure 3
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Mike Dorsett avatar image
Mike Dorsett answered ·

Try looking in the Virtual switch usage tab - configure the relay to dedicated generator control?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Juha Tuomala avatar image Juha Tuomala commented ·
VS cannot be used with ESS, so I had to use Cerbo relay2 output. Also, modifying inverter assistants, it requires power reset which is often no-no. Hence GX relays are better and more flexible solution.
0 Likes 0 ·
Luit Jan avatar image
Luit Jan answered ·

I think this is not (yet) possible in the Cerbo, but program this in your Quattro. That’s possible.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.