Does anyone have any information on connecting Quattro Inverter/Charger, 30A 12v dc-dc Charger and MPPT charger in parallel to charge the same battery bank, from multiple sources without manual switching
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Does anyone have any information on connecting Quattro Inverter/Charger, 30A 12v dc-dc Charger and MPPT charger in parallel to charge the same battery bank, from multiple sources without manual switching
I'm not sure about off-brand MPPT chargers, but if you are using a Victron BlueSolar or like-named MPPT charger, those are most definitely intended to work in parallel with a Multiplus/Quattro connected to the same battery bank..
If you are using them in conjunction with a VenusOS product (ColorControl GX, VenusGX, etc), I believe you can set up your system such that there is a maximum amount of net charge current allowed, which the system then automatically limits the charge current coming from the Quattro if there is a lot of incoming solar energy.
MPPT 150/60 up to 250/70 Manual
Additional resources still need to be added for this topic
MultiPlus Product page / Quattro Product page
MultiPlus 230V Manual / Quattro 230V Manual
25 People are following this question.
Why MPPT sizing system is recommending 150/35 and not 100/50 ?
Are 50vdc solar panels wasted on a 12vdc system?
How can I disable battery charging on a multiplus compact?
Large difference between solar blanket voltage output and Victron dashboard
SmartSolar MPPT 150/85 VE.Can - No current flow in Bulk with PV at VOC