question

anxur avatar image
anxur asked

display error on Victron BMV - 602S

Hi, since I've replaced batteries on my Victron BMV - 602S the display show the error you can se on the picture below. Any press of buttons doesn't work. What does it means?

thank you.

error
img-20200629-105929-1.jpg (18.9 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Thiemo van Engelen (Victron Energy staff) avatar image
Thiemo van Engelen (Victron Energy staff) answered ·

Hi Anxur,

This message means that the BMV is in firmware update mode. You could try to disconnect it for a short while an reconnect again. If this does not help, the unit might be defective.

Regards,

Thiemo van Engelen

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic