This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi
My setup:
Multiplus 2 5000
Byd b box pro 13.8
Im searching for the settings for depth of discharge setting. I can only find it at ESS but its not allowed to activate it running an offgrid version
I would like to shut down the system at 15% and reactivate the inverter at 18%.
Thanks it andance
You can set it using ve config on the inverter tab. Check shutdown on low SOC and set your percentage there. You will need to enable battery monitor on the general tab first.
Thanks for you answer.
I activated the battery monitor at the general tap and entered the capacity.
At the inverter tap i can only find
DC imput loq shutdown 37.20volt
Dc imput low restart 43.6volt
Dc imput low pre alarm 43.6volt
Im searching for the settings at % of battery depth of discharge.
I thought that when you use the ESS assistant it ignores the inverter tab shutdown values.
https://www.victronenergy.com/live/ess:design-installation-manual
It is not recommended to use ESS in an offgrid setup.
@Melonentier you may need to update ve config then, this is the version i am running.
I updated the firmare of the multiplus via mk3 and victronconnect to 470. After this the setting popped up to edit. The update resets all the settings make sure to save it first.
Thanks fpr your help!
