This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I’m adding 1200 watts PV to my ORV Timber Ridge 30 amp rig. Solars and 6 Battleborn wired for 24 volts.
Running the shore power straight to the MP AC in and AC 1 out to the main power center for powering all AC devices.
Will household 10/3 electrical cable (e.g. Southwire) be adequate for both in and out, factoring in PowerAssist?
Thanks
It's marginal with the inverter's surge capacity, but for a short run distance, it should be fine.
Interestingly, Outdoors RV uses Southwire Romex For its AC wiring, in 10/3, 12/2 and 14/2. Good to know.
