question

jmd007 avatar image
jmd007 asked

Easysolar stopped working after Firmware update.

Hi, I have a Victron Easysolar 24/1600/40. I have never been able to get it to work with my generator so I purchased I Mk3 USB interface. I plugged that into the Easysolar unit this morning and it did a software (device firmware) update. Ever since the software update the Red alarm light and the Green and Yellow light are flashing alternately and there is no inverter output. Running the generator makes no difference but the solar charger is working. Any ideas? I've had loads of issues with this thing!!!! :-(

EasySolar All-in-One
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

the-doon avatar image the-doon commented ·

Have you still got the USB interface plugged in?

0 Likes 0 ·
Show more comments
1 Answer
Paul B avatar image
Paul B answered ·

I presume you have sorted this by now, otherwise try reinstalled the firmware again , make sure you use the latest version for your model.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.