If I connect my 1000 watt water heater to AC2 of my Multiplus 48/3000 and use the assistants in below screenshot, is it correct that it will do the following?
- Start the boiler when above 70%
- Stop the boiler when at 60%
- Stop the boiler when overall load is above 2400 watts
- Only start the boiler when overall load is below 1500 watts
I found this thread that I've used as reference. My system is Easysolar 48/3000 with BMV712 battery monitor running 14kw lifepo4 batteries and the reasoning is that I'll never need more than 60% of batteries for other vital loads.
Thanks a lot!