Hello,
I have a house bank of GEL batteries which per the manufacturer have a bulk of 14.2v, abs 14.1 and float of 13.6.
My BMV712 is set to alarm on 14.4v.
The only charging source when I am not on the boat is the MPPT100/20 which is set as per this picture:
You can see the abs is 14.2v - no option to set bulk.
I am getting alarms about transient high voltage (14.2v in the picture below) when ever the system goes from bulk to absorption, which I can see in VRM:
Is this really a good thing?