This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi I have 75-15 Bluetooth mppt and 2x110 w solar panels. Although there is no consumption on the battery the app shows 10 current like there is a device consuming energy. I also have a LCD digital display and it shows no consumption. I wonder why the app shows current and accordingly the solar panels keep producing energy. Thank you
The current shown in the VictronConnect app is the charging current from the MPPT (from solar) into the battery.
Thank you but I guess you mean the current under “solar” tab. I meant the current value under “battery” tab (2.60A in the first example) so even there is no battery usage (only 0.33A as you may see from the screen of the other device) the app shows 2.6A. I also add another example and in that example although there is 7.53A use, the app only shows 3.40 A. There is a discrepancy between the measurements
The solar current ist the current from the solar panels to the MPPT, the battery current is the current from the MPPT to the battery.
The MPPT doesn't show any consumption.
Looks good.
Your mppt is turning that 1.2a
into 3.4a charging!
P.S.
If you see discrepancies down the road between your MPPT vs. LCD display that are subtle it might be due to either mppt draw or LCD draw vs the other but should even out over a broader sample time (like 30 minutes etc) it you track it over a longer period of time.
Hi Matthias I attached couple of photos. 
