Watch the video and look for the battery voltage.
https://streamable.com/65q8j0
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Watch the video and look for the battery voltage.
https://streamable.com/65q8j0
Hello Ulf, what is connected between the MPPT and the DC bus? any fuses or switches?
Regards, Rob
FYI, I disconnected the regulator, first from the solar panels and then from the batteries. Left it to self cure for a couple of hours and reconnected the cables. Batteries first and then the solar panels. After that everything seems to work again. .
MPPT 150/60 up to 250/70 Manual
Additional resources still need to be added for this topic
23 People are following this question.
SmartSolar MPPT 150/85 VE.Can - No current flow in Bulk with PV at VOC
Are 50vdc solar panels wasted on a 12vdc system?
Large difference between solar blanket voltage output and Victron dashboard
Victron mppt 100/50 controller not charging battery
Victron SmartSolar MPPT 150/85-MC4 Not showing panel voltages.