question

ulffredriksson avatar image
ulffredriksson asked

Smart solar. Battery voltage jumping up and down?

Watch the video and look for the battery voltage.

https://streamable.com/65q8j0

MPPT Controllersbatteryvoltage
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image klim8skeptic ♦ commented ·

Link not working.

0 Likes 0 ·
Show more comments
2 Answers
Rob Fijn avatar image
Rob Fijn answered ·

Hello Ulf, what is connected between the MPPT and the DC bus? any fuses or switches?

Regards, Rob

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ulffredriksson avatar image ulffredriksson commented ·

Yes a fuse. It seems unbroken but I Will change it anyway.

0 Likes 0 ·
ulffredriksson avatar image
ulffredriksson answered ·

FYI, I disconnected the regulator, first from the solar panels and then from the batteries. Left it to self cure for a couple of hours and reconnected the cables. Batteries first and then the solar panels. After that everything seems to work again. .

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual

Additional resources still need to be added for this topic