Hi all, my first post here.
Does anyone know how to calculate the output Voltage of Multipluss II inverter?
For example, the Voltage at the property (distribution board) is exactly 230V.
If Inverter would be charging batteries from the grid then there would be some voltage drop dependng on cabeling and load, say 2%, so Voltage at the end of the circuit where inverter is connected would be 230-230*0.02=225.4V
If now we wanted to export the energy from the battery, we would have to have higher voltage at the property than on the grid side (>230V) so the output Voltage should be at least 230V + whatever voltage drop (lets say we export the same power and it is again 2%). Would that mean that Voltage at output terminals of inverter would be 230+230*0.02=234.6V? Or that plus X% or X Volts ?
Basicaly I am trying to understand how inverter decides what voltage to output when outputing AC current - is it matching the grid+X% by consistantly monitoring voltage at the terminals and making sure that generated Voltage is higher?
Roberts