This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Following the advice from the community to get temperature charge compensation working with a Venus GX (using the generic temp probe) and a multiplus2/mppt, I enabled DVCC and STS, manually selected the temp probe (since auto detect doesn't find a generic probe).
The system is still not adjusting the float voltage.
At a bit of a loss to understand why.
Help as always appreciated.
In the absence of assistance from victron, I moved the probe from the venus to the multiplus and auto-detect immediately found the probe and the voltage changed instantaneously.
Why the Venus won't work just seems like bad coding.
Interestingly, the same probe on the multiplus reports 1.5C higher than the Venus.
