This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello.
Since firmware 2.57, not all MPPT charge controllers connected via USB can be found. I have connected 4 MPPT charge controllers. 2 x USB, directly on the Cerbo GX. 2 x via USB hub. Firmware 2.57 detects 1-2 charge controllers. When downgrading to 2.54, all charge controllers are found. 2 additional charge controllers are connected via VE.Direct and are always found.
Thanks
Paul
This blog should explain your problem:
https://www.victronenergy.com/blog/2020/07/13/venus-os-v2-57-cerbo-gx/
@mvader (Victron Energy) I have read it a couple of times to be sure but as I read it at the start of the post you indicate that the data issue does affect VE.Direct to USB. Then toward the end you indicate that it does NOT affect VE.Direct to USB.
Perhaps I have misunderstood but if not, it may need clarification.
Hi @warwick & @user0815, its ok to use that port for VE.Direct for a little while longer (by downgrading). Especially if it has already worked.
but deep down it doesnt function properly, which is why we disabled it per v2.57. Better to do that now than continuing with some for most now functioning yet half broken port which, for whatever random change in firmware the future, may prove to fail completely.
However frustrating...
