This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello all,
half an hour ago we made v2.60~34 available for testing. Short version of this news this time, see previous v2.60 beta post for background.
Changes:
have a good weekend, Matthijs
I see ~35 is released but there aren't any release notes.
I have opted to test the beta release in the hopes that the issue with DVCC not using the Venus attached temperature sensor for charge compensation works, unfortunately it still does not.
@nickdb, did you explicitly select the sensor or are you expecting it to happen automatically? To avoid the possibility of using the wrong temperature sensor, we will only use a temperature reading automatically if comes from the battery service itself, for example a temperature probe attached to a BMV-702 or BMV-712. The reason for this is to avoid misconfigured temperature sensors, which may be reading too cold, from raising the charge voltage. You can imagine what would happen to a lead acid battery if the sensor that measures the freezer was misconfigured.
Hi all,
i updated my RPI3+ (with original 7" touchscreen v1.1 connected via spi port) to this latest version because i couldn't get this backlight dimming working previously. I think i've tried quite some things to get the dimming working but the touchscreen (or the RPI) refuses to do so.
What is not working for me?
Using Venus OS v2.60~34 doesn't show me the mentioned brightness slider in the menu.
I found out the necessary kernel module is installed on my system but the section "rpi_backlight" is missing in /sys/class/backlight/
Before i installed this image i managed to get the brightness slider shown using following these steps: https://groups.google.com/forum/?nomobile=true#!searchin/victron-dev-venus/dimming%7Csort:date/victron-dev-venus/wqRZ00UkveQ/_c_K2DOlAQAJ
The slider appeared in the menu but moving the slider from left to right didn't change the brightness of my display.
I experience similar problems to poweroff the screen after a certain time. I have the feeling that both problems have a common issue preventing them to work.
Can anybody help me out?
Thanks in advance!
My RPi3B+ with 7" LCD work fine after update to Venus OS v2.60~34.
Try create (edit) two files :
"nano /etc/venus/backlight_device" and copy text "/sys/class/backlight/rpi_backlight"
"nano /etc/venus/blank_display_device" and copy text "/sys/class/backlight/rpi_backlight/bl_power"
Then reboot.
Hi Daniel,
Thanks for your answer. I did that and both lines appeared in the menu. Unfortunately the screen doesn't respond to changes in the menu settings.
When i apply the following:
"nano /etc/venus/blank_display_device" and copy text "/sys/class/graphics/fb0/blank"
The display becomes black but the backlight of the screen stays on and gives a significant amount of light at night in my RV. For that reason i like to be able to switch off the entire backlight.
Is there a way to check if the drivers are installed correctly? I've no clue how to do that...
Thanks once more
Ok, try this
opkg update
opkg install kernel-module-rpi-backlight
cd /u-boot/overlays
wget https://github.com/PiNet/PiNet-Boot/raw/master/boot/overlays/rpi-backlight-overlay.dtb
Thanks Daniel!
Downloading the rpi-backlight-overlay.dtb did the job. Apparently that file was not in the installation package or at least it was missing from my system. I hope somebody from Victron can check if the file is available in the images else a lot of other people might break their heads on this!
Once again thanks for the help i will start testing it now with my MultiPlus and BMV-712.
opkg update is no longer working,
i''m getting this:
opkg_download_backend: Failed to download https://updates.victronenergy.com/feeds/venus/release/packages/zeus/all/Packages.gz, wget returned 8.
I am following up on this thread.
I have just installed a fresh copy of VenusOS 2.8x and cant seem to shut off the backlight either.
However from an SSH terminal,
echo 0 >/sys/class/backlight/rpi_backlight/bl_power
Sets highest brightness, whereas
echo 255 > /sys/class/backlight/rpi_backlight/bl_power
Sets the max screen dimming, which appears to be about 60% only. So still quite bright. ( same as screen dimming options ).
Is there a way to shut this off completely including thr backlight?
Thanks.
