I have a mppt 100/20 (48v) controller. I was wondering if there is a female AC plug adaptor available that could use to plug into my minnkota 48v battery system AC converter charging unit. If so, do I plug it into battery or load on the controller?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a mppt 100/20 (48v) controller. I was wondering if there is a female AC plug adaptor available that could use to plug into my minnkota 48v battery system AC converter charging unit. If so, do I plug it into battery or load on the controller?
I’m wanting to plug my 400w solar set up that connects to my controller directly to the minnkota charging unit ( with male ac plug) that is already connected to the 4 (12v) batteries. (Normal AC charge method to recharge the batteries).
Basically I have a minnkota powered boat that uses (4) 12v batteries to power. It has a charging unit that is also connected to the batteries, that uses AC plug in power to charge.
I’m trying to add solar power as well now but having difficulty getting it to work when connecting straight to the batteries via the controller. Was wondering if there was a female plug adapter that could run from the solar controller to the charger. Would that work?
17 People are following this question.