Hello
I have a few question about Victron setup. And hopefully someone can help me.
At this moment I have a 3 phase power connection to my house. I don’t use 3 phase equipment.
At phase 1, a Victron multiplus 24/2000/50-30 is connected. This Victron will power some groups to my house. A PV is connected on the AC-OUT. The 1:1 rule is followed.
For management I have a Victron Venus and BMV-702 to control my 2 batt (12v/220AH). The SOC is managed by victron venus and not by the multiplus. as assistent i use the ESS.
Question 1:
Is possible to add a second Victron multiplus on the second phase. So this unit can also power some groups that are connected on phase 2. So this is not a parallel or 3 phase configuration. There will be no equipment behind the victrons that will use both phase.
Is this possible? And if so, is allow to use a different model like multiplus-II for example.
Question 2:
Is possible to connect both Victron at the same battery set. Of course the DC power must be the same.
I wondering about the how the charging will take place, or will the Victron Venus control this process on both victrons.
Question 3:
The last one…but I think already know the answer.
Is there also a 1:1 rule for mppt that is connected on the DC site of the victron multiplus. I read on other post that there is no power limit. (https://community.victronenergy.com/questions/16442/rule-11-pv-power-plant-victron-inverters.html)