I currently have a MultiPlus Compact (NA) installed in my camper van and I'm trying to change how I control it.
When I purchased and installed the system, I used a MultiControl panel to turn the inverter on, etc. but I'm making some changes to my camper van and want to eliminate the MultiControl panel.
I also have a Venus GX installed.
In the short term, I would like to control it with the Victron VE.Bus Bluetooth dongle and in the long term, I would like to control it with my own custom Arduino based automation system.
When I connect to my inverter using Victron Connect (over Bluetooth), I can see my inverter thanks to the Victron Bluetooth dongle but it won't allow me to control the state of the inverter stating that it is in secondary mode and it is controlled by another control system (I assume the retired Multi-Control).
How can I change this configuration so that I can control the inverter state over Victron Connect?
I would also welcome any tips or information you have so I can control the inverter state using my Arduino system. I have already found a way to connect a physical three way switch which I could replicate using some relays but I suspect there are simpler ways.
Thanks in advance!
