question

jeffb1234 avatar image
jeffb1234 asked

How do you wire the Skylla-i remote on off?

Can someone please clarify what input the skylla i required to be remotely switched?

Can a simple volt free contact be used, closed circuit on, open circuit off? This is the opposite of what was required on the standard skylla TG chargers?

The manual mentions an open collector input, is this a single wire connection with a commin ground? does this get connected to the reMote terminal only?


thanks in advance

Skylla
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
dennison-p-pulgarin avatar image
dennison-p-pulgarin answered ·

contact close to power off the device and contact open to turn it on


i hope this help you.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic