question

dionysios-koutsouvelis avatar image
dionysios-koutsouvelis asked

Using Pheonix Inverters and Skylla Chargers on a CAN-bus

Good day

In your manual, for Phoenix inverters 3K/5K, you mention that the inverters can be ordered as 120V/60Hz on request. Can we order a 5KVA Phoenix inverter as 120VAC selectable for 50 or 60Hz?

We want to use three of these inverters in a wye configuration 3*115VAC/208VAC.

We want to use an additional three of these inverters in a wye configuration 3*230VAC/400VAC as a second 3 phase output.

What is the peak power for 20 min at 65Celcius, for these inverters?

Do you have any MTBF data, for these inverters?

Can all 3+3 inverters all be connected on the same VE-bus and then converted to VE-can or must each three be connected on a separate VE-bus and each group (of three inverters) converted with a seperate VE-bus to VE-can module.

We also want to connect three Skylla-i (1+1) chargers to VE-can.

Can all the above operate together on a common NMEA 2000 can-bus?

Thank you in advance
Dion

Phoenix InverterVE.BusSkylla
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
dionysios-koutsouvelis avatar image
dionysios-koutsouvelis answered ·

Hello


Is there any answer for my question above?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Phoenix Inverter product page

Phoenix Inverter Smart product page

What is VE.Bus?

Additional resources still need to be added for this topic