Evening all
I have a 48V 8KVA Quattro which all of a sudden presented a fault this evening, this happened after mains failed, but because it happened after hours the generator was set not to start (via a Venus)
Because it was the first time I have seen this I went out to site and inspected everything. I couldn't see any fault and then tried to reset the unit using Remote Console. Nothing changed. I then used the switch on the inverter, swithing it off and then back on (waiting only about 5 seconds). The inverter then turned on with no problem.
After checking other posts, is see I am not the only one struggling with this, but there has been no recent posts regarding this.
I have checked and the Quattro is running firmware V430, which I find odd as if I read correctly V475 is available and the unit is only 5 months old.
Has anyone else encountered this issue, and more importantly been able to solve it?
Are the issues mentioned in other posts (faulty ribbon cables) still valid?