question

wildside avatar image
wildside asked

RS 48/6000 Smart Inverter Start up Voltage

Hi folks, the data sheet gives the start up voltage at 120v but operating from 80-450. My solar panels would be 3 x 320W in series with 38.05 voc and 31.58 vmp. Would the built in mppt fail to start/charge at these voltages? If so would adding a fourth panel work?Its for a caravan so space is limited but it may be possible to add a fourth panel. Thanks for any advice.

Phoenix Inverter
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

In your case, 4 panels or higher voltage panels would be STRONGLY recommended.

The Inverter RS MPPT is really intended for larger PV arrays.

Also be aware it is for 48V battery banks only.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

wildside avatar image
wildside answered ·

Thanks Guy, yes this would be powering a 7kw 48v battery bank.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.