question

veganvanlife avatar image
veganvanlife asked

Converting a LYNX Power In hold MEGA Fuses (LYNX Distributor without circuitry)

Having watched Journey With Jono's video:

39. Lithium Battery Management & Monitoring Install:

https://www.youtube.com/watch?v=JW-v8PNx2C4&vl=da


I just wanted to confirm the LYNX's M8 Bolt length and material when modifying the LYNX Power In to hold MEGA Fuses to perform like the LYNX Distributor.


The M8 bolts appear to be around 30mm in length and look like Stainless Steel.

Considering M8 Brass Nuts, Bolts and Spring Rings.


Anyone able to clarify/recommend?

lynx shunt
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @VeganVanlife,


I've done the same. Using stainless steel bolts, nuts and washers. Length is the same like the ones already installed.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Lynx Shunt VE Can online manual


Additional resources still need to be added for this topic