I have a 100/20 solar reg, 30amp victron charger and Bmv712, the 712 reads solar voltage and gives an inaccurate SOC. Is there anyway to get an accurate Soc
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a 100/20 solar reg, 30amp victron charger and Bmv712, the 712 reads solar voltage and gives an inaccurate SOC. Is there anyway to get an accurate Soc
@Frankaus, if installed properly and configured correctly the BMV-712 is almost painfully accurate. That being said, if it is installed correctly it will be showing battery voltage, not solar voltage; if you're showing solar voltage then it's not installed correctly.
Please see the user manual for the correct installation and programming of the device.
14 People are following this question.