This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have 3 VE Direct cables to my Cerbo (from 3 MPPT controllers) and 1 VE Direct to USB cable (from a MPPT 100/20) all to my Cerbo GX. I receive detailed data on the VRM Portal for the 3 MPPTs connected by the VE Direct cables, but I do not receive any of the detailed information on the Advanced Tab on the VRM Portal for the MPPT that is connected to the Cerbo GX by the VE Direct to USB cable. How can I add that detailed info to the VRM Portal from the VE Direct to USB cable and MPPT? Thank you.
Hi, I tookk the liberty of looking your installation up on VRM, and I see four MPPTs - are you sure one is missing?
by the way make sure to not use the usb port close to the hdmi connector for the GX Touch. Use the other two. The reason for this is explained here at the bottom: https://www.victronenergy.com/live/venus-os:start
Best regards, Matthijs
Thank you for looking! The 4th MPPT does appear, but there is no charts or data like there is for the other 3 under the "Advanced" tab.
Hey Gordon, get in touch, to let me know how your system is going. You have changed your email, so I could not reply to you today. My email is still the same. Cheers!
