This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
The default inverter settings 'DC input low pre-alarm' and 'DC input low shut-down' from the Multiplus 12V/80/2000 are very low.
DC input low pre-alarm: 9,3V and DC input low shut-down: 10,9V.
What are the right settings for Victron super cylcle AGM accu's?
This Setting is the very very last hard off setting. You never should reach such a setting and better control it with external BMV. Voltage Hardlimmt CUT offs are difficult and always depeding on batterie capacity / load current in the moment of switching off.
Hi Agnieta. This is something you'll need to determine yourself. Largely dependent on loads you might apply and how far your V dips. Even with full charge, a fair load will affect that, but may bounce straight back. So you don't want to trip for a peak load if your batts are fine.
Pete above is quite correct. Perhaps you could dodge the BMV if you 'get to know' your batts.
Agnieta,
We’re you satisfied with those answers?
Dan
