question

nzmikec avatar image
nzmikec asked

Cyrix-Li-ct with lead acid house battery

Hi, Just wondering if it is possible or advisable to use the lithium version of the cyrix-ct with a SLA house battery.

Im considering this because adding a lithium house battery soon. I understand I would need to control the BMS wire of the relay to enable the relay to close.

Looks like the enable / disable voltage would work with lead acid being 13.4-13.2v


Thanks, Mike

Cyrix Battery Combinercampervanlead-acid
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
dazey77 avatar image
dazey77 answered ·

I can't see a problem with this, as long as you hold the BMS line high it should work OK.

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ozzdemir avatar image ozzdemir commented ·

I am also planning to use Cyrix-Li-ct to connect 2 lead-acid batteries since my car(hybrid) charges the battery with 14.2V and Cyrix-ct seems to work with at most 13.8V. Is holding BMS line high only requirements to work Cyrix-Li-ct just like Cyrix-ct without BMS?

0 Likes 0 ·
Show more comments
nzmikec avatar image
nzmikec answered ·

Thanks for the answer! Do you know if the BMS line can be held at +12v (or vbatt) or is it some logic level?

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

dazey77 avatar image dazey77 commented ·

Hold the BMS at +12v/vbatt. There is also a ground connection you have to make.

0 Likes 0 ·
nzmikec avatar image
nzmikec answered ·

Thanks very much! I have just ordered the relay.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Product page Cyrix Battery Combiner

Additional resources still need to be added for this topic